A low cost, convenient, field-installable solution to
some of the most demanding high temperature problems.
A health conscious alternative to asbestos
Silicaflex™ Tape AB is a slit silica tape constructed from 96% pure SiO2 silica fiber, coated one side with a pressure sensitive adhesive backing that facilitates installation. The adhesive decomposes at high temperatures, leaving a perfectly tape-wrapped hose, cable or pipe.
Designed for severe heat environments
Suitable for use at 1800°F (982°C), and able to withstand short term exposure up to 3000°F (1650°C), Silicaflex Tape AB sets the standard for flexibility and minimum lineal shrinkage under high heat conditions.
Durability is further enhanced with a proprietary hydro-carbon coating, giving Silicaflex™ Tape AB unmatched abrasion resistance and tensile strength.
Stock and custom sizes
Available in standard widths of 2″ (50 mm) and 4″ (102 mm).
We can also fabricate custom widths. Let us know what you need, with a quick on-line Request for Information. We’ll respond promptly.
| Silicaflex™ Tape AB – Quick Facts | |
|---|---|
| Continuous operating temp: | 1800°F (982°C) |
| Max short term exposure: | 3000°F (1650°C) |
| Molten splash resistance: | Good |
| Flame resistance: | Outstanding |
| Abrasion resistance: | Moderate |
| Flexibility: | Outstanding |
| Tensile strength: | Good |
| Silicaflex™ Heat Tape AB (with Adhesive Backing) | |
|---|---|
| Tape Width | Part No. |
| 2″ | STAB-2 |
| 3 | STAB-3 |
| 4 | STAB-4 |
| Available in 150 foot rolls. | |
| SILICAFLEX TAPE AB (with Adhesive Backing) | |
|---|---|
| Tape Width | Part No. |
| 51mm | STAB-2 |
| 76mm | STAB-3 |
| 102mm | STAB-4 |
| Available in 45 metre rolls. | |