Flexgard™ Firesleeve



The high abrasion strength and heat resistance of woven ballistic Nylon® protect personnel against hose spray-out failures

Stays intact at the highest operating temperature

possible for any Nylon® woven sleeve

Designed for use in applications up to 260°F (126°C) continuous, Flexgard™ is the only Nylon® abrasion fire sleeve treated with our proprietary heat and flame resistant coating technology.

Protective shield between operators and ruptured hoses

If your application requires protecting personnel from hydraulic hose spray-out failures, Flexgard™ fire sleeve outperforms all other Nylon® woven firesleeves in both heat and abrasion resistance.

Underground mining applications

Flexgard™ fire sleeve is MSHA approved (MSHA # IC-258/0) for use in underground mines. (It is not recommended for electrical cables in underground mining application or for the repair of damaged hydraulic hoses.) See Flexgard News.

Custom colours and packaging options

Flexgard™ firesleeve is available in inside diameters from 0.5″ (12 mm) up to 3.5″ (88 mm). Standard colour is black, but custom colours are available by special order. Supplied in 300 ft (91.4 m) coils or in custom packaging.

  • Flexgard™ firesleeve is MSHA approved (MSHA # IC-258/0)
  • Nylon® is a Registered Trademark of Dupont Corporation.
Flexgard™ Firesleeve – Quick Facts
Continuous operating temp: 260°F (126°C)
Max short term exposure: 450°F (232°C)
Molten splash resistance: Not recommended
Flame resistance: Good
Abrasion resistance: Outstanding
Flexibility: Outstanding
Water and oil resistance: Good

Flexgard™ Firesleeve
Inside Diameter Part No.
3/4″ FG-12
7/8 FG-14
1 FG-16
1 1/8 FG-18
1 1/4 FG-20
1 1/2 FG-24
1 3/4 FG-28
2 FG-32
2 1/2 FG-40
3 FG-48
3 1/2 FG-56
Available in 164′ coils.
FLEXGARD SLEEVE WITH VELCRO CLOSURE OPTION
Inside Diameter Part No.
1″ FGVCO-16
1 1/2 FGVCO-24
2 FGVCO-32
3 FGVCO-48
4 FGVCO-64
5 FGVCO-80
6 FGVCO-96
7 FGVCO-112
8 FGVCO-128
Available in 75′ or 150′ lengths.
OTHER AVAILABLE ACCESSORIES FOR FLEXGARD
– CINCH STRAPS
– HANGING CINCH STRAPS
FLEXGARD SLEEVE
Inside Diameter Part No.
19mm FG-12
22 FG-14
25 FG-16
29 FG-18
32 FG-20
38 FG-24
44 FG-28
51 FG-32
64 FG-40
76 FG-48
89 FG-56
Available in 90mtr coils.
FLEXGARD SLEEVE WITH VELCRO CLOSURE OPTION
Inside Diameter Part No.
25mm FGVCO-16
38 FGVCO-24
51 FGVCO-32
76 FGVCO-48
102 FGVCO-64
127 FGVCO-80
152 FGVCO-96
178 FGVCO-112
203 FGVCO-128
Available in 22.5mtr or 45mtr lengths.
OTHER AVAILABLE ACCESSORIES FOR FLEXGARD
– CINCH STRAPS
– HANGING CINCH STRAPS

Contact us or call direct to experience the best client care! 905.377.1488